It is easily installed with the included wall mount bracket and the quick-release hose that is included with the Safe Cell is simply pulled off the intake port of the Safe Cell and put on the blower with a slight twisting motion. The timer can be set to run for as little as a half an hour every day to automatically ventilate the shelter. In an NBC event, the occupants simply remove the hose from this blower and install it onto the Safe Cell. This can be done in a few seconds.

The fan is rated at 50 cubic feet per minute. This will give you three air exchanges per half hour in a 1,000 cubic foot shelter. If you live in a humid area or have a larger shelter, the timer can be increased in half-hour increments to provide more air exchanges.

• One 50 CFM 12 volt DC fan attached to a 4-inch, schedule 40 ABS pipe section
  One AC power supply (converts 120 VAC to 12 VDC)
  One mounting bracket with quick-release (slip fit) connections for the air intake hose
  One 120 VAC automatic timer
  Two lag bolts and washers for mounting on a wall.
  One hard copy of the manual.

   

  American Safe Room provides free air filtration and component blast protection shelter consultations. Contact our Sales Manager at 541-459-1806 or send a plan view drawing of your shelter to sales@AmericanSafeRoom.com or FAX it to 503-212-6695.